The history of scuba diving is closely linked with the history of scuba equipment. By the turn of the twentieth century, two basic architectures for underwater breathing apparatus had been pioneered; open-circuit surface supplied equipment where the diver's exhaled gas is vented directly into the water, and closed-circuit breathing apparatus where the diver's carbon dioxide is filtered from unused oxygen, which is then recirculated. Closed circuit equipment was more easily adapted to scuba in the absence of reliable, portable, and economical high pressure gas storage vessels. By the mid twentieth century, high pressure cylinders were available and two systems for scuba had emerged: open-circuit scuba where the diver's exhaled breath is vented directly into the water, and closed-circuit scuba where the carbon dioxide is removed from the diver's exhaled breath which has oxygen added and is recirculated. Oxygen rebreathers are severely depth limited due to oxygen toxicity risk, which increases with depth, and the available systems for mixed gas rebreathers were fairly bulky and designed for use with diving helmets. The first commercially practical scuba rebreather was designed and built by the diving engineer Henry Fleuss in 1878, while working for Siebe Gorman in London. His self contained breathing apparatus consisted of a rubber mask connected to a breathing bag, with an estimated 50-60% oxygen supplied from a copper tank and carbon dioxide scrubbed by passing it through a bundle of rope yarn soaked in a solution of caustic potash. During the 1930s and all through World War II, the British, Italians and Germans developed and extensively used oxygen rebreathers to equip the first frogmen. In the U.S. Major Christian J. Lambertsen invented an underwater free-swimming oxygen rebreather. In 1952 he patented a modification of his apparatus, this time named SCUBA,(an acronym for "self-contained underwater breathing apparatus"), which became the generic English word for autonomous breathing equipment for diving, and later for the activity using the equipment. After World War II, military frogmen continued to use rebreathers since they do not make bubbles which would give away the presence of the divers. The high percentage of oxygen used by these early rebreather systems limited the depth at which they could be used due to the risk of convulsions caused by acute oxygen toxicity.
Although a working demand regulator system had been invented in 1864 by Auguste Denayrouze and Benoît Rouquayrol, the first open-circuit scuba system developed in 1925 by Yves Le Prieur in France was a manually adjusted free-flow system with a low endurance, which limited the practical usefulness of the system. In 1942, during the German occupation of France, Jacques-Yves Cousteau and Émile Gagnan designed the first successful and safe open-circuit scuba, a twin hose system known as the Aqua-Lung. Their system combined an improved demand regulator with high-pressure air tanks. This was patented in 1945. To sell his regulator in English-speaking countries Cousteau registered the Aqua-Lung trademark, which was first licensed to the U.S. Divers company, and in 1948 to Siebe Gorman of England, Siebe Gorman was allowed to sell in Commonwealth countries, but had difficulty in meeting the demand and the U.S. patent prevented others from making the product. The patent was circumvented by Ted Eldred of Melbourne, Australia, who developed the single-hose open-circuit scuba system, which separates the first stage and demand valve of the pressure regulator by a low-pressure hose, puts the demand valve at the diver's mouth, and releases exhaled gas through the demand valve casing. Eldred sold the first Porpoise Model CA single hose scuba early in 1952.
Early scuba sets were usually provided with a plain harness of shoulder straps and waist belt. Many harnesses did not have a backplate, and the cylinders rested directly against the diver's back. Early scuba divers dived without a buoyancy aid. In an emergency they had to jettison their weights. In the 1960s adjustable buoyancy life jackets (ABLJ) became available, which can be used to compensate for loss of buoyancy at depth due to compression of the neoprene wetsuit and as a lifejacket that will hold an unconscious diver face-upwards at the surface. The first versions were inflated from a small disposable carbon dioxide cylinder, later with a small direct coupled air cylinder. A low-pressure feed from the regulator first-stage to an inflation/deflation valve unit an oral inflation valve and a dump valve lets the volume of the ABLJ be controlled as a buoyancy aid. In 1971 the stabilizer jacket was introduced by ScubaPro. This class of buoyancy aid is known as a buoyancy control device or buoyancy compensator. A backplate and wing is an alternative configuration of scuba harness with a buoyancy compensation bladder known as a "wing" mounted behind the diver, sandwiched between the backplate and the cylinder or cylinders. This arrangement became popular with cave divers making long or deep dives, who needed to carry several extra cylinders, as it clears the front and sides of the diver for other equipment to be attached in the region where it is easily accessible. Sidemount is a scuba diving equipment configuration which has basic scuba sets, each comprising a single cylinder with a dedicated regulator and pressure gauge, mounted alongside the diver, clipped to the harness below the shoulders and along the hips, instead of on the back of the diver. It originated as a configuration for advanced cave diving, as it facilitates penetration of tight sections of cave as, sets can be easily removed and remounted when necessary. Sidemount diving has grown in popularity within the technical diving community for general decompression diving, and has become a popular specialty for recreational diving.
In the 1950s the United States Navy (USN) documented procedures for military use of what is now called nitrox, and in 1970, Morgan Wells, of (NOAA) began instituting diving procedures for oxygen-enriched air. In 1979 NOAA published procedures for the scientific use of nitrox in the NOAA Diving Manual. In 1985 IAND (International Association of Nitrox Divers) began teaching nitrox use for recreational diving. After initial resistance by some agencies, the use of a single nitrox mixture has become part of recreational diving, and multiple gas mixtures are common in technical diving to reduce overall decompression time. Nitrogen narcosis limits the depth when breathing nitrox mixtures. In 1924 the US Navy started to investigate the possibility of using helium and after animal experiments, human subjects breathing heliox 20/80 (20% oxygen, 80% helium) were successfully decompressed from deep dives, Cave divers started using trimix to allow deeper dives and it was used extensively in the 1987 Wakulla Springs Project and spread to the north-east American wreck diving community. The challenges of deeper dives and longer penetrations and the large amounts of breathing gas necessary for these dive profiles and ready availability of oxygen sensing cells beginning in the late 1980s led to a resurgence of interest in rebreather diving. By accurately measuring the partial pressure of oxygen, it became possible to maintain and accurately monitor a breathable gas mixture in the loop at any depth. In the mid 1990s semi-closed circuit rebreathers became available for the recreational scuba market, followed by closed circuit rebreathers around the turn of the millennium. Rebreathers are currently (2018) manufactured for the military, technical and recreational scuba markets.
Video History of scuba diving
Early history
A scuba set is characterized by full independence from the surface during use, by providing breathing gas carried by the diver. Early attempts to reach this autonomy were made in the 18th century by the Englishman John Lethbridge, who invented and successfully built his own underwater diving machine in 1715, but though the air supply was carried in the diving apparatus, it relied on surface tenders to deploy and move around under the water, and was effectively an atmospheric pressure diving bell.
An early diving dress using a compressed air reservoir was designed and built in 1771 by Sieur Fréminet from Paris. He conceived an autonomous breathing machine equipped with a reservoir, dragged behind the diver or mounted on his back. Fréminet called his invention machine hydrostatergatique and used it successfully for more than ten years in the harbors of Le Havre and Brest, as stated in the explanatory text of a 1784 painting.
The Frenchman Paul Lemaire d'Augerville built and used autonomous diving equipment in 1824, as did the British William H. James in 1825. James' helmet was made of "thin copper or sole of leather" with a plate window, and the air was supplied from an iron reservoir. A similar system was used in 1831 by the American Charles Condert, who died in 1832 while testing his invention in the East River at only 20 feet (6 m) deep. The oldest known oxygen rebreather was patented on June 17, 1808 by Sieur Touboulic from Brest, mechanic in Napoleon's Imperial Navy, but there is no evidence of any prototype having been manufactured. This early rebreather design worked with an oxygen reservoir, the oxygen being delivered progressively by the diver himself and circulating in a closed circuit through a sponge soaked in limewater.
After having travelled to England and discovered William James' invention, the French physician Manuel Théodore Guillaumet, from Argentan (Normandy), patented in 1838 the oldest known regulator mechanism. Guillaumet's invention was air-supplied from the surface and was never mass-produced due to problems with safety. The oldest practical rebreather relates to the 1849 patent from the Frenchman Pierre Aimable De Saint Simon Sicard.
Maps History of scuba diving
First successful scuba equipment
None of those inventions solved the problem of high pressure when compressed air must be supplied to the diver (as in modern regulators); they were mostly based on a constant-flow supply of the air. The compression and storage technology was not advanced enough to allow compressed air to be stored in containers at sufficiently high pressures to allow useful dive times.
By the turn of the twentieth century, two basic templates for a scuba had emerged; open-circuit scuba where the diver's exhaled gas is vented directly into the water, and closed-circuit scuba where the diver's carbon dioxide is filtered from unused oxygen, which is then recirculated.
Open circuit
These were the first systems that became popular with recreational divers. They were safer than early rebreather systems, less expensive to operate, and allowed dives to greater depths.
An important step for the development of open circuit scuba technology was the invention of the demand regulator, a mechanism that conserves air supply by providing air flow only when the outlet pressure is reduced when the diver inhales. In 1864, the French engineers Auguste Denayrouze and Benoît Rouquayrol designed and patented their "Rouquayrol-Denayrouze diving suit" after adapting a pressure regulator and developing it for underwater use. This would be the first diving suit that could automatically supply air to the diver on demand by adjusting the flow of air from the tank to meet the diver's breathing and pressure requirements. The system still had to use surface supply to provide useful endurance, as the pressure cylinder provided was only a low capacity accumulator.
The first open-circuit scuba system was devised in 1925 by Yves Le Prieur in France. Inspired by the simple ambient pressure supply valve apparatus of Maurice Fernez and the freedom it allowed the diver, he conceived an idea to make it free of the hose from the surface pump by using Michelin cylinders for the air supply, containing three litres of air compressed to 150 kilograms per square centimetre (2,100 psi; 150 bar). The "Fernez-Le Prieur" diving apparatus was demonstrated at the swimming pool of Tourelles in Paris in 1926. The unit consisted of a cylinder of compressed air carried on the back of the diver, connected to a pressure regulator designed by Le Prieur which was adjusted manually by the diver, with two gauges, one for tank pressure and one for output (supply) pressure. Air was supplied continuously through the mouthpiece and exhausted through a short tube fitted with a valve as in the Fernez design, however, the lack of a demand regulator and the consequent low endurance of the apparatus limited the practical use of LePrieur's device.
Fernez had previously invented a noseclip, a mouthpiece fitted with a one-way valve for exhalation and diving goggles, and Yves le Prieur just added a manually-controlled regulator and a compressed air cylinder to those three elements. Fernez's goggles did not cover the nose, which allows the diver to equalise the internal pressure by letting air flow into the goggles through the nose, so they did not allow a dive deeper than ten metres due to "mask squeeze". In 1933, Le Prieur replaced all the Fernez equipment (goggles, noseclip and valve) by a full face mask, directly supplied with constant flow air from the cylinder. Le Prieur's design was the first autonomous breathing device used by the first scuba diving clubs in history - Racleurs de fond founded by Glenn Orr in California in 1933, and Club des sous-l'eau founded by Le Prieur himself in Paris in 1935.
In 1942, during the German occupation of France, Jacques-Yves Cousteau and Émile Gagnan designed the first successful and safe open-circuit scuba, known as the Aqua-Lung. Their system combined an improved demand regulator with high-pressure air tanks. Émile Gagnan, an engineer employed by the Air Liquide company, miniaturized and adapted the regulator manufactured for use with gas generators in response to the constant fuel shortage that was a consequence of German requisitioning. Gagnan's boss, Henri Melchior, knew that his son-in-law Jacques-Yves Cousteau was looking for an automatic demand regulator to increase the useful period of the underwater breathing apparatus invented by le Prieur, so he introduced Cousteau to Gagnan in December 1942. On Cousteau's initiative, Gagnan's regulator was adapted to diving, and the new Cousteau-Gagnan patent was registered some weeks later in 1943. In 1957, Eduard Admetlla i Lázaro used a modified version of the Aqua-Lung made by Nemrod and broke the world record by descending to a depth of 100 metres (330 ft).
Closed circuit
The alternative concept, developed in roughly the same time frame was closed-circuit scuba. The body normally consumes and metabolises only a small fraction of inhaled oxygen - the situation is even more wasteful of oxygen when the breathing gas is compressed as it is in ambient pressure breathing systems underwater. The rebreather recycles the exhaled breathing gas, while constantly replenishing it from an oxygen-rich supply so that the oxygen level is not depleted. The apparatus also has to remove the exhaled carbon dioxide, as a buildup of CO2 levels would result in respiratory distress and hypercapnia.
The first commercially practical scuba rebreather was designed and built by the diving engineer Henry Fleuss in 1878, while working for Siebe Gorman in London. His self contained breathing apparatus consisted of a rubber mask connected to a breathing bag, with an estimated 50-60% oxygen supplied from a copper tank and carbon dioxide scrubbed by passing it through a bundle of rope yarn soaked in a solution of caustic potash, the system giving a dive duration of up to about three hours. Fleuss tested his device in 1879 by spending an hour submerged in a water tank, then one week later by diving to a depth of 5.5 metres (18 ft) in open water, on which occasion he was slightly injured when his assistants abruptly pulled him to the surface. This apparatus was first used under operational conditions in 1880 by Alexander Lambert, the lead diver on the Severn Tunnel construction project, who was able to travel 1,000 feet (300 m) in the darkness to close several submerged sluice doors in the tunnel; this had defeated the best efforts of standard divers due to extremely long distance, along which their air supply hoses became fouled on submerged debris, and the strong water currents in the workings.
Fleuss continually improved his apparatus, adding a demand regulator and tanks capable of holding greater amounts of oxygen at higher pressure. Sir Robert Davis, head of Siebe Gorman, improved the oxygen rebreather in 1910 with his invention of the Davis Submerged Escape Apparatus, the first rebreather to be made in quantity. While intended primarily as an emergency escape apparatus for submarine crews, it was soon also used for diving, being a handy shallow water diving apparatus with a thirty-minute endurance, and as an industrial breathing set.
The rig comprised a rubber breathing/buoyancy bag containing a canister of barium hydroxide to absorb exhaled carbon dioxide and, in a pocket at the lower end of the bag, a steel pressure cylinder holding approximately 56 litres (2.0 cu ft) of oxygen at a pressure of 120 bars (1,700 psi) which was equipped with a control valve and connected to the breathing bag. Opening the cylinder's valve admitted oxygen to the bag at ambient pressure. The rig also included an emergency buoyancy bag on its front to help keep the wearer afloat. After further development by Davis in 1927 the DSEA was adopted by the Royal Navy.
In 1911 Dräger of Lubeck tested a self-contained rebreather system for standard diving equipment, which used an injector system to circulate the breathing gas through the breathing loop and scrubber. This was put into service soon thereafter and was available in two versions, an oxygen rebreather DM20 for depths shallower than 20m, and a nitrox rebreather DM40 for depths up to 40m.
During the 1930s and all through World War II, the British, Italians and Germans developed and extensively used oxygen rebreathers to equip the first frogmen. The British adapted the Davis Submerged Escape Apparatus and the Germans adapted the Dräger submarine escape rebreathers, for their frogmen during the war.
The Italians developed similar rebreathers for the combat swimmers of the Decima Flottiglia MAS, especially the Pirelli ARO. In the U.S. Major Christian J. Lambertsen invented an underwater free-swimming oxygen rebreather in 1939, which was accepted by the Office of Strategic Services. In 1952 he patented a modification of his apparatus, this time named SCUBA,(an acronym for "self-contained underwater breathing apparatus"), which became the generic English word for autonomous breathing equipment for diving, and later for the activity using the equipment. After World War II, military frogmen continued to use rebreathers since they do not make bubbles which would give away the presence of the divers. The high percentage of oxygen used by these early rebreather systems limited the depth at which they could be used due to the risk of convulsions caused by acute oxygen toxicity.
Post WWII
Air Liquide started selling the Cousteau-Gagnan regulator commercially in 1946 under the name of scaphandre Cousteau-Gagnan or CG45 ("C" for Cousteau, "G" for Gagnan and 45 for the 1945 patent). The same year Air Liquide created a division called La Spirotechnique, to develop and sell regulators and other diving equipment. To sell his regulator in English-speaking countries Cousteau registered the Aqua-Lung trademark, which was first licensed to the U.S. Divers company.(the American division of Air Liquide) and later sold with La Spirotechnique and U.S. Divers to finally become the name of the company, Aqua-Lung/La Spirotechnique, currently located in Carros, near Nice.
In 1948 the Cousteau-Gagnan patent was also licensed to Siebe Gorman of England, Siebe Gorman was allowed to sell in Commonwealth countries, but had difficulty in meeting the demand and the U.S. patent prevented others from making the product. This patent was circumvented by Ted Eldred of Melbourne, Australia, who had been developing a rebreather called the Porpoise. When a demonstration of this rebreather resulted in a diver passing out, he developed the single-hose open-circuit scuba system, which separates the first stage and demand valve of the pressure regulator by a low-pressure hose, puts the demand valve at the diver's mouth, and releases exhaled gas through the demand valve casing. Eldred sold the first Porpoise Model CA single hose scuba early in 1952.
Early scuba sets were usually provided with a plain harness of shoulder straps and waist belt. The waist belt buckles were usually quick-release, and shoulder straps sometimes had adjustable or quick release buckles. Many harnesses did not have a backplate, and the cylinders rested directly against the diver's back.
Early scuba divers dived without a buoyancy aid. In an emergency they had to jettison their weights. In the 1960s adjustable buoyancy life jackets (ABLJ) became available, which can be used to compensate for loss of buoyancy at depth due to compression of the neoprene wetsuit and as a lifejacket that will hold an unconscious diver face-upwards at the surface, and that can be quickly inflated. The first versions were inflated from a small disposable carbon dioxide cylinder, later with a small direct coupled air cylinder. A low-pressure feed from the regulator first-stage to an inflation/deflation valve unit lets the volume of the ABLJ be controlled as a buoyancy aid. In 1971 the stabilizer jacket was introduced by ScubaPro. This class of buoyancy aid is known as a buoyancy control device or buoyancy compensator.
A backplate and wing is an alternative configuration of scuba harness with a buoyancy compensation bladder known as a "wing" mounted behind the diver, sandwiched between the backplate and the cylinder or cylinders. Unlike stabilizer jackets, the backplate and wing is a modular system, in that it consists of separable components. This arrangement became popular with cave divers making long or deep dives, who needed to carry several extra cylinders, as it clears the front and sides of the diver for other equipment to be attached in the region where it is easily accessible. This additional equipment is usually suspended from the harness or carried in pockets on the exposure suit.
In 1911 Draeger of Germany tested an injector operated rebreather backpack for a standard diving suit. This concept was produced and marketed as the DM20 oxygen rebreather system and the DM40 nitrox rebreather system, in which air from one cylinder and oxygen from a second cylinder were mixed during injection through a nozzle which circulated the breathing gas through the scrubber and the rest of the loop. The DM40 was rated for depths up to 40m. In the 1950s the United States Navy (USN) documented enriched oxygen gas procedures for military use of what we today call nitrox, in the USN Diving Manual, and in 1970, Morgan Wells, who was the first director of the National Oceanographic and Atmospheric Administration (NOAA) Diving Center, began instituting diving procedures for oxygen-enriched air. In 1979 NOAA published Wells' procedures for the scientific use of nitrox in the NOAA Diving Manual. In 1985 Dick Rutkowski, a former NOAA diving safety officer, formed IAND (International Association of Nitrox Divers) and began teaching nitrox use for recreational diving. This was considered dangerous by some, and met with heavy skepticism by the diving community. Nevertheless, in 1992 NAUI became the first existing major recreational diver training agency to sanction nitrox, and eventually, in 1996, the Professional Association of Diving Instructors (PADI) announced full educational support for nitrox. The use of a single nitrox mixture has become part of recreational diving, and multiple gas mixtures are common in technical diving to reduce overall decompression time.
Technical diving is recreational scuba diving that exceeds the generally accepted recreational limits, and may expose the diver to hazards beyond those normally associated with recreational diving, and to greater risks of serious injury or death. These risks may be reduced by appropriate skills, knowledge and experience, and by using suitable equipment and procedures. The term technical diving has been credited to Michael Menduno, who was editor of the (now defunct) diving magazine aquaCorps Journal. The concept and term are both relatively recent advents, although divers had already been engaging in what is now commonly referred to as technical diving for decades. In his 1989 book, Advanced Wreck Diving, author and leading technical diver, Gary Gentile, commented that there was no accepted term for divers who dived beyond agency-specified recreational limits for non-professional purposes. Revised editions use the term technical diving, and Gentile published a further book in 1999 entitled The Technical Diving Handbook.
There is some professional disagreement as to what exactly technical diving encompasses. Nitrox diving and rebreather diving were originally considered technical, but this is no longer universally the case as several certification agencies now offer recreational nitrox and recreational rebreather training and certification. Even those who agree on the broad definitions of technical diving may disagree on the precise boundaries between technical and recreational diving. One reasonably widely held definition is that any dive in which at some point of the planned profile it is not physically possible or physiologically acceptable to make a direct and uninterrupted vertical ascent to surface air is a technical dive. The equipment often involves breathing gases other than air or standard nitrox mixtures, multiple gas sources, and different equipment configurations. Over time, some equipment and techniques developed for technical diving have become more widely accepted for recreational diving.
Nitrogen narcosis limits the depth reachable by underwater divers when breathing nitrox mixtures. In 1924 the US Navy started to investigate the possibility of using helium and after animal experiments, human subjects breathing heliox 20/80 (20% oxygen, 80% helium) were successfully decompressed from deep dives, followed by salvage diver Max "Gene" Nohl's dive to 127 meters in 1937. and the 1939 US Navy salvage of USS Squalus. In 1963 saturation dives using trimix were made during Project Genesis, and in 1979 a research team at the Duke University Medical Center Hyperbaric Laboratory started work which identified the use of trimix to prevent High Pressure Nervous Syndrome symptoms. Cave divers started using trimix to allow deeper dives and it was used extensively in the 1987 Wakulla Springs Project and spread to the north-east American wreck diving community, and by 1994 John Chatterton and Gary Gentile, dived on the RMS Lusitania expedition to a depth of 100 meters using trimix.
The challenges of deeper dives and longer penetrations and the large amounts of breathing gas necessary for these dive profiles reawakened interest in rebreathers. The ready availability of oxygen sensing cells beginning in the late 1980s led to a resurgence of interest in rebreather diving. By accurately measuring the partial pressure of oxygen, it became possible to maintain and accurately monitor a breathable gas mixture in the loop at any depth. In the mid 1990s semi-closed circuit rebreathers became available for the recreational scuba market, followed by closed circuit rebreathers around the turn of the millennium. Rebreathers are currently (2018) manufactured for the military, technical and recreational scuba markets.
Sidemount is a scuba diving equipment configuration which has basic scuba sets, each comprising a single cylinder with a dedicated regulator and pressure gauge, mounted alongside the diver, clipped to the harness below the shoulders and along the hips, instead of on the back of the diver. It originated as a configuration for advanced cave diving, as it facilitates penetration of tight sections of cave as, sets can be easily removed and remounted when necessary. The configuration allows easy access to cylinder valves, and provides easy and reliable gas redundancy. These benefits for operating in confined spaces were also recognized by divers who made wreck diving penetrations. Sidemount diving is now growing in popularity within the technical diving community for general decompression diving, and has become a popular specialty for recreational diving, with several diver certification agencies offering recreational and technical level sidemount training programs.
Dive computers
Scuba decompression planning originally based on printed decompression tables developed for surface supplied air diving. This was inefficient for multi-level dives, and the custom of multilevel diving using tables was not supported by formal experimental testing, but seemed to work reasonably well in practice in accordance with the theoretical models.
The Office of Naval Research funded a project with the Scripps Institute of Oceanography for the theoretical design of a prototype decompression analog computer. The Foxboro Decomputer, Mark I was manufactured by the Foxboro Company and evaluated by the US Navy Experimental Diving Unit in 1957. Confusion between the diffusivity coefficient and the then new concept of tissue half time resulted in a device that did not properly mirror decompression status. Had this error not occurred, the U.S. Navy Tables might never have been developed, and divers might have been using instrumentation to control their dives from 1957 on.
The first recreational mechanical analogue dive computer, the "decompression meter" was designed by the Italians De Sanctis & Alinari in 1959 and built in their factory named SOS, which also made depth gauges. The decompression meter was distributed directly by SOS and also by scuba diving equipment firms such as Scubapro and Cressi. It was very simple in principle: a waterproof bladder filled with gas inside a big casing bled into a smaller chamber through a semi-porous ceramic cartridge (to simulate tissue in/out gassing). The chamber pressure was measured by a bourdon tube, calibrated to indicate decompression status. The device functioned so poorly that it was eventually nicknamed "bendomatic".
In 1965, Stubbs and Kidd applied their decompression model to a pneumatic analogue decompression computer.
Several analogue decompression meters were subsequently made, some with several bladders for illustrating the effect on various body tissues, but they were sidelined with the arrival on the scene of electronic computers.
In 1983, the Hans Hass-DecoBrain, designed by Divetronic AG a Swiss start-up, became the first decompression diving computer, capable of displaying the information that today's diving computers do. The DecoBrain was based on A. Bühlmann's 16 compartment (ZHL-12) tissue model which Jürg Hermann, an electronic engineer implemented in 1981 on one of Intel's first single-chip microcontrollers as part of his thesis at the Swiss Federal Institute of Technology.
The 1984 Orca EDGE was an early example of a dive computer. Designed by Craig Barshinger Karl Huggins and Paul Heinmiller, the EDGE did not display a decompression plan, but instead the EDGE showed the ceiling or the so-called "safe-ascent-depth". A drawback was that if the diver was faced by a ceiling, he did not know how long he would have to decompress. The EDGE's large, unique display, however, featuring 12 tissue bars permitted an experienced user to make a reasonable estimate of his or her decompression obligation.
In 1984 the US Navy diving computer (UDC) which was based on a 9 tissue model of Edward D. Thalmann of the Naval Experimental Diving Unit (NEDU), Panama City, who developed the US Navy tables. Divetronic AG completed the UDC development - as it had been started by the chief engineer Kirk Jennings of the Naval Ocean System Center, Hawaii, and Thalmann of the NEDU - by adapting the Deco Brain for US Navy warfare use and for their 9-tissue MK-15 mixgas model under an R&D contract of the US Navy.
Orca Industries continued to refine their technology with the release of the Skinny-dipper in 1987 to do calculations for repetitive diving. They later released the Delphi computer in 1989 that included calculations for diving at altitude as well as profile recording.
Even by the late 1980s, the advent of dive computers had not met with what might be considered widespread acceptance. Combined with the general mistrust, at the time, of taking a piece of electronics that your life might depend upon underwater, there were also objections expressed ranging from dive resorts felt that the increased bottom time would upset their boat and meal schedules, to that knowledgeable divers felt that the increased bottom time would, regardless of the claims, result in many more cases of Decompression sickness). Understanding the need for clear communication and debate, Michael Lang of the California State University at San Diego and Bill Hamilton of Hamilton Research Ltd. brought together, under the auspices of the American Academy of Underwater Sciences a diverse group that included most of the dive computer designers and manufacturers, some of the best known hyperbaric medicine theorists and practitioners, representatives from the recreational diving agencies, the cave diving community and the scientific diving community.
The basic issue was made clear by Andrew A. Pilmanis in his introductory remarks: "It is apparent that dive computers "are here to stay" but are still in the early stages of development. From this perspective, this workshop can begin the process of establishing standard evaluation procedures for assuring safe and effective utilization of dive computers in scientific diving."
After meeting for two days the conferees were still in, "the early stages of development," and the "process of establishing standard evaluation procedures for assuring safe and effective utilization of dive computers in scientific diving," had not really begun. University of Rhode Island Diving Safety Officer Phillip Sharkey and ORCA EDGE's Director of Research and Development, prepared a 12-point proposal that they invited the Diving Safety Officers (DSO) in attendance to discuss at an evening closed meeting. Those attending included: Jim Stewart (Scripps Institution of Oceanography), Lee Somers (University of Michigan), Mark Flahan (San Diego State University), Woody Southerland (Duke University), John Heine (Moss Landing Marine Laboratories), Glen Egstrom (University of California, Los Angeles), John Duffy (California Department of Fish and Game), and James Corry (United States Secret Service). Over the course of several hours the suggestion prepared by Sharkey and Heinmiller was edited and turned into the following 13 recommendations:
- Only those makes and models of dive computers specifically approved by the Diving Control Board may be used.
- Any diver desiring the approval to use a dive computer as a means of determining decompression status must apply to the Diving Control Board, complete an appropriate practical training session and pass a written examination.
- Each diver relying on a dive computer to plan dives and indicate or determine decompression status must have his own unit.
- On any given dive, both divers in the buddy pair must follow the most conservative dive computer.
- If the dive computer fails at any time during the dive, the dive must be terminated and appropriate surfacing procedures should be initiated immediately.
- A diver should not dive for 18 hours before activating a dive computer to use it to control his diving.
- Once the dive computer is in use, it must not be switched off until it indicates complete outgassing has occurred or 18 hours have elapsed, whichever comes first.
- When using a dive computer, non-emergency ascents are to be at the rate specified for the make and model of dive computer being used.
- Ascent rates shall not exceed 40 fsw/min in the last 60 fsw.
- Whenever practical, divers using a dive computer should make a stop between 10 and 30 feet for 5 minutes, especially for dives below 60 fsw.
- Only 1 dive on the dive computer in which the NDL of the tables or dive computer has been exceeded may be made in any 18-hour period.
- Repetitive and multi-level diving procedures should start the dive, or series of dives, at the maximum planned depth, followed by subsequent dives of shallower exposures.
- Multiple deep dives require special consideration.
As recorded in "Session 9: General discussion and concluding remarks:" "Mike Lang next lead the group discussion to reach consensus on the guidelines for use of dive computers. These 13 points had been thoroughly discussed and compiled the night before, so that most of the additional comments were for clarification and precision. The following items are the guidelines for use of dive computers for the scientific diving community. It was again reinforced that almost all of these guidelines were also applicable to the diving community at large."
The remarkable thing about this process is that after the AAUS workshop the opposition to dive computers crumbled, numerous new models were introduced, the technology dramatically improved and dive computers became, virtually overnight, the standard pieces of diving equipment that they are today.
In 2001, the US Navy approved the use of Cochran NAVY decompression computer with the VVAL 18 Thalmann algorithm for Special Warfare operations.
In 2008, the Underwater Digital Interface (UDI) was released to the market. This dive computer, based on the RGBM model, includes an underwater communication system that enables divers to transmit text messages, also featuring SOS and homing capabilities, and digital 3D compass.
- training agencies introduce training in the use of dive computers as part of standard training
- introduction of wireless gas pressure displays and consumption rate calculations into dive computers - estimate of remaining bottom time allows easier gas management - reduction in risk of out of gas emergencies for single mix no-stop dives.
Industry growth
Recreational scuba diving industry diving experienced major growth at the end of the 20th century. Number of new divers per year has stabilised since then. Estimated 1 million new divers were certified in 2012.
Scuba diving remains a dynamic recreation - there is continuous development of equipment and practices.
Many recreational divers trained every year, but most do not appear to dive very often. Large dropout rate after initial and advanced training.
Industry sectors:
- Diver training - commercialisation of training, breaking training down into smaller components for diver convenience and industry profit
- Equipment sales - wide range of equipment, catering for fashion and personal preferences as well as technical necessity, safety and effectiveness
- Consumables sales and equipment maintenance - supporting the astablished diver as well as the novice and occasional diver.
- Dive charters, guided dives - targeting vacationers and travellers to exotic destinations.
Professional scuba industry much lower numbers, but higher levels of training, and lower droput rate. Greater motivation as it is part of the job. Probably insignificant to the industry as a whole. Slightly different equipment use. Military scuba supports some manufacturers of specialised equipment
Scuba training
Professional scuba training and certification
Professional diving is done as a part of the work the diver is employed to do, and as such is generally subject to occupational health and safety regulation. This extends to training, certification and the asssociated training standards. Commercial diver training is often regulated by national or state government, so details and standards tend to vary internationally, but there are systems in place for recognition of minimum standards between jurisdictions, allowing some international portability of commercial diver certification. In some jurisdictions a distinction is made between industrial commercial diving and professional diving as part of scientific or public safety occupations, where a variety of regulatory exemptions may apply. In situations where exemptions apply, the training and certification through recreational agencies may be recognised for professional diving activities where this is not permitted for industrial commercial diving. Military diving is frequently independent of commercial diving regulation, and military diver training is usually controlled by the armed forces which employ the divers. In some cases there is recognition of military diver qualifications for work in the civilian industry, in other cases not.
The American Academy of Underwater Sciences (AAUS) is a group of scientific organizations and individual members who conduct scientific and educational activities underwater. It was organized in 1977 and incorporated in the State of California in 1983. The purpose of the AAUS is to facilitate the development of safe and productive scientific divers and scientific diving procedures through education, research, advocacy, and the advancement of the AAUS Standards for Scientific Diving Certification and Operation of Scientific Diving Programs. These are the consensual guidelines for scientific diving programs in the US, and are recognized by Occupational Safety and Health Administration as the "Standard" for scientific diving. These standards are followed by all AAUS Organizational Members allowing for reciprocity between institutions. Each institution is responsible for upholding the standards within its program and among its divers. The AAUS peer reviews the standards on a regular basis, so they represent the consensus of the scientific diving community and state-of-the-art technologies.
The CMAS Scientific committee compiled and edited the UNESCO Code of Practice for Scientific diving between 1977 and the publication of the document as Unesco technical papers in marine science 53 in 1988.
The International Diving Schools Association (IDSA) was formed in 1982 with the primary purpose of developing common international standards for commercial diver training. The Association has published basic tables for international comparison of training standards for commercial divers and some specialist non-diving qualifications such as diving supervisors, diving medical technicians and life support technicians based on consensus of members.
The International Diving Regulators Forum (IDRF) confirmed its principals and purpose at their meeting in London in September 2009. The statement of principals and purpose states "The forum has agreed to work together towards mutual recognition to identify and implement best practice in diver training and assessment with the objective of harmonising cross-border diver training outside Europe." The organisation has since changed its name to International Diving Regulators and Certifiers Forum (IDRCF) Members of the IDRF include ADAS (Australia), DCBC (Canada), HSE (UK), PSA (Norway), and the Secretariat General to the Sea Progress Committee (France).
- UK HSE Diving at work regulations
- Australian Diver Accreditation Scheme (ADAS) and Australian scientific diving CoP
- South African Diving Regulations - 2001, 2009, previous to 2001, 2018, CoP for commercial diver training
- Various Canadian standards and regulations
Recreational scuba training and certification
The need for formalised training was recognised due to the high number of recreational scuba accidents. this led to the creation of training and certification agencies. BS-AC was formed in 1953, CMAS in 1959, NAUI in 1960 and PADI in 1966.
The sport of scuba diving had its roots among the multitude of small enthusiastic snorkelling and spearfishing clubs in the decades just before and after the Second World War. After the invention of the "aqualung" by Cousteau and Gagnan, the first commercially marketed underwater breathing apparatus became available for sale for sporting purposes in the late 1940s. As the new sport of scuba diving rapidly expanded through the 1950s, several sporting organisations - notably the YMCA - began programmes to train swimming enthusiasts in this new aquatic pastime and began to codify what were believed to be the proper practices needed for this expanding amateur sport. The buddy system had been thought to be a useful corollary to the "never swim alone" edicts of the YMCA swimming and lifesaving programmes. Cousteau himself independently implemented a buddy system from the earliest days of exploratory diving after a number of diving incidents. The buddy system did indeed have some very useful aspects: the cross checking of equipment before dives, the facilitating of assistance for possible entanglement problems or equipment failures, and the enhancement of the social nature of diving. The YMCA continued as a major force in the development of diver certification during the first 50 years of this new sport. When these programmes were adopted by the emerging scuba certification agencies such as BS-AC, NAUI and PADI, the practice of buddy diving led to one of the two main mantras of recreational scuba: "never hold your breath" and "never dive alone".
An international congress of fifteen diving federations representing all underwater disciplines met in Brussels on 28 September 1958. National delegates attended from Belgium, Brazil, France, Federal Republic of Germany, Greece, Italy, Monaco, Portugal, Switzerland,the United Kingdom, the United States of America and the former Yugoslavia. Following a decision at that congress, a meeting was held in Monaco on 9-11 January 1959, which officially established the World Underwater Federation, with an acronym CMAS based on its French title Confédération Mondiale des Activités Subaquatiques.
In 1951, Jim Auxie Jr and Chuck Blakeslee started a magazine called The Skin Diver (later renamed Skin Diver Magazine). Two-year dive teacher Neal Earl Hess contributed to its "The Instructors Corner" column to inform readers about scuba. He soon established a column called "The National Diving Patrol" as a section to name new skin and scuba diving "instructors." Still, no official training and certifying agency existed, except for the training and resources provided by the military (Underwater Demolition Teams) and dive clubs.
In 1952, Al Tillman, the director of sports for the L.A. County Parks and Recreation, said in a letter to Parks and Recreation director Paul Gruendyke, "A new sport--skin diving--is becoming popular in the area. Recently while diving in Palos Verdes, I ran into several divers in the water with me who didn't know what they were doing. One had one of the new underwater breathing units that allows divers to stay under for long periods of time... I propose that my department get involved in this sport and provide training classes. I believe that diving will grow in the future and we have an obligation to make the sport as safe as possible."
On 15 October 1953, the British Sub-Aqua Club (BSAC} was founded by Oscar Gugen, Peter Small, Mary Small, and Trevor Hampton
In 1955, Tillman and L.A. County lifeguard Bev Morgan created the L.A. County Parks and Recreational Underwater Instructor Certification Course (1UICC) in an effort to respond to the growing number of diver requests. It was the world's first civilian training program to certify recreational divers and soon began granting Provisional Certification to instructors across the country.
In the 1960 May issue of Skin Diver Magazine, The National Diving Patrol was announced as an official, national organization. Its purpose and function was "to insure competent underwater instruction and to reduce diving accidents through education." In 1959, its name changed to the National Association of Underwater Instructors (NAUI). In October 1961, NAUI was incorporated in the State of California as a non-profit educational organization, with Al Tillman as the President and Neal Hess as the Executive Secretary.
The Professional Association of Diving Instructors (PADI) is a recreational diving membership and diver training organization founded in 1966 by John Cronin and Ralph Erickson. Cronin was originally a NAUI instructor who decided to form his own organization with Erickson, and to break diver training down into several modular courses instead of the single universal course then prevalent. Diving Science and Technology Corporation (DSAT), the development arm for the Recreational Dive Planner and PADI's Tec-Rec program, was founded in November 1986.
Dick Rutkowski, previously a dive supervisor for the National Oceanic and Atmospheric Administration (NOAA), formed the International Association of Nitrox Divers (IAND) in 1985 to teach the use of nitrox, which had been pioneered by NOAA, to recreational divers. In 1992 the name was changed to the International Association of Nitrox and Technical Divers (IANTD).
Technical Diving International (TDI) was founded in 1994 by Bret Gilliam, and others after a split from IANTD in 1993 to provide training for specialized diving situations. TDI courses include open circuit Nitrox, Trimix and Rebreather courses, and training for overhead environments like caves and wrecks. In 1998, International Training started a sister organization to TDI known as Scuba Diving International (SDI) focusing on recreational scuba and in 2000, Emergency Response Diving International (ERDI) to teach public safety diving.
Following the recognition that solo diving does occur, is acceptably safe to many divers, and is a relatively common practice, Scuba Diving International (SDI) started Solo diving training and certification in 1999.
In 2006 BSAC was the first recreational diving agency to introduce Nitrox diving as part of core training.
Internationally recognised minimum training standards for recreational divers have been published by: RSTC, WRSTC, CMAS, ISO etc.( Rebreather training council?)
The US Recreational Scuba Training Council (RSTC) was created in 1986 as a permanent body to sustain a relationship between various recreational diving training organisations. In 1991, it replaced the Diving Equipment Manufacturers Association (DEMA) (renamed as the Diving Equipment and Marketing Association in 1998) as the secretariat for the then American National Standards Institute (ANSI) committee for underwater safety (also known as the Z86 Committee). The Z86 committee was subsequently replaced by the committee for Diving Instructional Standards and Safety (also known as the Z375 committee). In 2007 it retained its appointment as the ANSI Accredited Standards Developer (ASD) for the Z375 committee.
The US RSTC has been responsible for the development of a standard medical statement (in conjunction with the Undersea and Hyperbaric Medical Society) and minimum training standards for diving hand signals and the following recreational diver grades - Introductory Scuba Experience, Supervised Diver, Open Water Diver, Enriched Air Nitrox Certification, Entry level Rescue Diver, Dive Supervisor, Assistant Instructor, Scuba Instructor and Scuba Instructor Trainer.
The World Recreational Scuba Training Council (WRSTC) was founded in 1999 and to create minimum recreational diving training standards for the various scuba diving certification agencies across the world which are members. The WRSTC restricts its membership to national or regional councils. These councils consist of individual training organizations who collectively represent at least 50% of the annual diver certifications in the member council's country or region. A national council is referred to as a RSTC (Recreational Scuba Training Council).
The International Organization for Standardization (ISO) published minimum standards in 2007 for: (superseded by 2014 revisions)
- ISO 24801-1:2014 Recreational diving services - Requirements for the training of recreational scuba divers - Part 1: Level 1 - Supervised diver,
- ISO 24801-2:2014 Recreational diving services - Requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous diver,
- ISO 11107 - 'Nitrox diving'
- ISO 24801-3:2014 Recreational diving services - Requirements for the training of recreational scuba divers - Part 3: Level 3 - Dive leader,
- ISO 24802-1:2014 Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level 1, and ISO 24802-2:2014 Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2
Research into scuba diver safety
The non-profit Divers Alert Network (DAN) was founded at Duke University in 1980 to promote safe diving. and has expanded into a global group of not-for-profit organisations providing safety and insurance services to members and maintaining databases on diving accidents. They publish research results and collaborate with other organizations on projects of common interest, mostly regarding scuba diving safety.
Cave diving
The exploration of underwater parts of caves was started using surface supplied equipment before scuba became available. Jacques-Yves Cousteau, co-inventor of the first commercially successful open circuit scuba equipment, is claimed to have been the world's first open circuit scuba cave diver.
Two regions have had particular influence on cave diving techniques and equipment due to their very different cave diving environments. These are the United Kingdom, and USA, mainly Florida.
UK history
The number of sites where standard diving dress could be used is limited and there was little progress before the outbreak of World War II reduced the caving community considerably. The development of underwater warfare made a lot of surplus equipment available after the war. The Cave Diving Group re-formed in 1946 and progress was rapid. Typical equipment at this time was a frogman rubber diving suit for insulation (water temperature in the UK is typically 4 °C), a closed circuit oxygen rebreather and an "Apparatus For Laying Out Line And Underwater Navigation." The "AFLOLAUN" consisted of lights, line-reel, compass, notebook (for the survey), batteries, and more.
Progress was typically by "bottom walking", as this was considered less dangerous than swimming in the absence of buoyancy control. The use of oxygen put a depth limit on the dives. This was the normal procedure until approximately 1960 when new techniques using wetsuits and open-circuit scuba sets were introduced. The development of side mounting cylinders, helmet-mounted lights and free-swimming with fins increased acessibility, and the increasing capacity and pressure rating of air cylinders extended dive durations.
US History
In the 1970s, cave diving greatly increased in popularity among divers in the United States. However, there were very few experienced cave divers and almost no formal classes to handle the surge in interest. The result was a large number of divers trying to cave dive without any formal training. This resulted in more than 100 fatalities over the course of the decade. The state of Florida came close to banning SCUBA diving around the cave entrances. The cave diving organizations responded to the problem by creating training programs and certifying instructors, in addition to other measures to try to prevent these fatalities. This included posting signs, adding no-lights rules, and other enforcements.
The cave diving pioneer Sheck Exley explored many underwater cave systems in Florida, and elsewhere in the US and the rest of the world. On 6 February 1974, Exley became the first chairman of the Cave Diving Section of the National Speleological Society.
Since the 1980s, cave diving education has greatly reduced diver fatalities, and it is now uncommon for a certified cave diver to die in an underwater cave. Also in the 1980s, refinements were made to the equipment used for cave diving, most importantly better lights with smaller batteries. In the 1990s, cave diving equipment configurations became more standardized, due mostly to the adaptation and popularization of the backplate and wing based "Hogarthian Rig", developed in North Florida, which keeps equipment configurations simple and streamlined.
Documentary films made by Wesley C. Skiles and Jill Heinerth have contributed to the increasing popularity of cave diving in the early 21st century.
Wreck diving
- Origins in salvage and archaeology.
- Development into a recreational activity by scuba divers.
References
Source of article : Wikipedia
0 Comments